HOT WATER CIRCULATOR / RECIRCULATOR

 

DOES NOT HEAT WATER

  IT CIRCULATES / RECIRCULATES WATER

 

 

(CLICK IMAGE for CLOSE-UP)

Hot water circulating pump, hot water pump, hot water recirculation, hot water recirculator

 

Ships with Premium 7-Day Timer Multiple Events Per Day(not shown)

A - CONTROL DEVICE PLUG-IN SOCKET  (Standard 3-Prong Wall Socket)
This standard 3-prong socket will accept most any 3 prong control desired by the homeowner for quick-n-easy control customization.  See examples below.  RedyTemp ships with a 7-day timer not shown in the above picture.   Many of these "outlet" control devices are readily available at home improvement stores, big brand stores and the internet.  Simply search / ask for appliance outlet control devices.

 

Examples of Socket Control Devices:


B - CONTROL ENABLER PLUG (Standard 2-Prong Plug)
This standard 2 prong plug, plugs-in to whatever control device is plugged into (A) interchangeable control socket.  Plugging (B) directly into (A) without any control device enables the RedyTemp to operate 24 hours a day cycling on and off as needed to maintain the temperature set at (D).

C - ON-DEMAND / ANYTIME SINGLE-CYCLE OVERRIDE CONNECTION RJ11 STANDARD PHONE JACK.
Allows for easy installation of a simple non-illuminating doorbell button (available at home improvement stores at around $2.00) or other momentary contact switch that best matches a rooms decor.  Simply splice and connect the doorbell button or switch into one end of a standard phone cords middle two wires and plug the other end into the RJ11 jack. This switch gives the homeowner the means to "single-cycle" override the control / timer for use during scheduled-off time periods. Additionally, this also enables the homeowner to operate their circulation system in an "On-Demand" push-button mode.   Multiple push-buttons can be easily installed throughout the home by simply using a 5-plug modular phone adapter which are easily available at home improvement / electronics / 99 cent stores. 

D - TEMPERATURE ADJUSTMENT DIAL.
Allows the homeowner to control / optimize their hot water comfort to their desired temperature.  As well, homeowners have the ability to  prevent pipes from freezing by using RedyTemp's lower temp settings if desired.  Range is from 50F to 115F. With people having unique comfort standards for hot water, this have-it-your-way feature makes the RedyTemp a win win solution.. Allowing a homeowner to maximize their hot water comfort without loosing control of their cold water comfort.  If the homeowner was to experience loss of cold water comfort, the homeowner need only adjust the back down the temperature to a more optimal setting.  Thereby, preventing the over pumping which caused the loss of cold water comfort.  RedyTemp's extremely accurate half-a-degree incremental adjustment capability ensures optimal comfort. 


E - Hot Water Supply Connection. Easily connects to homes existing hose at the Faucet End  which is typically a industry standard 1/2" connection.  If access to the faucet connections are not possible, connecting directly to the Supply Shut-Off valves is possible by obtaining the appropriate ?/?" to 1/2" adapters which are readily available at all hardware / home improvement stores for under a dollar.

F - Hot Water Faucet Connection 1/2" connection

G - Cold Water Supply Connection Easily connects to homes existing hose at the Faucet End  which is typically a industry standard 1/2" connection.  If access to the faucet connections are not possible, connecting directly to the Supply Shut-Off valves is possible by obtaining the appropriate ?/?" to 1/2" adapters which are readily available at all hardware / home improvement stores for under a dollar.


H - Cold Water Faucet Connection 1/2" connection

 

OPEN LOOP (uses cold water line as return line) and CLOSED LOOP (dedicated hot water return line exists) installations.

RedyTemp operates on both open loop (shown below) and closed loop water systems.  On a closed loop system installation you cap-off the two faucet connection ports and connect the RedyTemp to the loop using (E) for the hot water supply (incoming) and (G) for the return (outgoing).
 

 

      3-STEP INSTALLATION

 

hot-water-circulator-installation       

 

 

 

 

 

 

 

 

 

EASY  AS        ONE             TWO           THREE